Electrically Conducting Pullulan-Based Nanobiocomposites Using Carbon Nanotubes and TEMPO Cellulose Nanofibril.

Hybrid nanobiocomposite films are prepared using a solution casting by incorporating TEMPO cellulose nanofibrils (TOCNs) and carbon nanotubes (CNTs) into an aqueous solution of pullulan (PULL). The presence of CNT is confirmed by XRD characterization, and the prepared film shows an increased degree of crystallinity after the addition of TOCNs and CNT. The maximum degree of crystallinity value is obtained for CNT 0.5 % (59.64%). According to the Fourier-transform infrared spectroscopy, the shifts of the characteristic -OH peak of PULL occurred after the addition of TOCNs and aqueous CNT (3306.39 to 3246.90 cm-1), confirming interaction between the TOCNs, CNTs, and PULL matrix. The prepared films show enhanced material properties including higher tensile strength (65.41 MPa at low CNT content (0.5%)), water barrier properties, and reduced moisture susceptibility (5 wt.% CNT shows the lowest value (11.28%)) compared with the neat PULL film. Additionally, the prepared films are almost biodegradable within 64 days and show excellent electrical conductivity (0.001 to 0.015 S/mm for 0.5-5% CNT), which suggests a new approach to transform natural polymers into novel advanced materials for use in the fields of biosensing and electronics.

Electrospinning Fabrication of Poly(vinyl alcohol)/Coptis chinensis Extract Nanofibers for Antimicrobial Exploits.

Coptis chinensis (CC) is used in conventional Chinese medicine. The main active components of CC are isoquinoline alkaloids, including berberine, coptisine, palmatine, and magnoflorine; all these are known to have several pharmacological properties. Poly(vinyl alcohol) (PVA) is a well-known synthetic biocompatible polymer suitable for a range of pharmaceutical uses; it can be used as a matrix for the incorporation of functional materials and has a wide range of applications in the cosmetics, food, pharmaceutical, and packaging industries. In this study, PVA-based electrospun nanofibers containing CC extract were successfully fabricated. Furthermore, the effects of different CC extract contents on the morphologies, and antimicrobial and antifungal properties of PVA/CC extract nanofibers were investigated. Morphological changes were observed using different molecular weights of PVA. For characterization, field-emission scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared analysis were performed. The effectiveness of these nanofibers has been demonstrated by evaluating the thermal stability against Staphylococcus aureus, antimicrobial activity against Staphylococcus aureus and Staphylococcus epidermidis, and the antifungal activity against the fungi Aureobasidium pullulans and Penicillium pinophilum. The PVA/CC extract nanofibers were found to have excellent antibacterial and antifungal activity and thermal stability; hence, their use in medicinal sectors is highly recommended.

Optimum Conditions for the Fabrication of Zein/Ag Composite Nanoparticles from Ethanol/H2O Co-Solvents Using Electrospinning.

The optimum conditions for the fabrication of zein/Ag composite nanoparticles from ethanol/H2O cosolvents using electrospinning and the properties of the composite were investigated. The zein/Ag nanoparticles were characterized using field-emission scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and thermogravimetric analysis. The antibacterial activity of the zein/Ag composite nanoparticles was also investigated. The XRD patterns and TEM images indicate the coexistence of a zein matrix and well-distributed Ag nanoparticles.